Bruton Dedik
Run xDedic scanner, input ports (3389 - public Dedic; 3390, 3391 - Privat Dedic)
Insert a band of any kind and wait until Found's.
When I found about 2K found's can safely go in ForcerX.
Skank IP for Brutus
Features:
1. The scan ranges in CIDR format and in standard ie understands both the 1.0.0.0/24 and 1.0.0.0-2.0.0.0
2. Automatic loading ranges of the countries
3. The ability to scan multiple ports or range of ports
4. The ability to write to the file as just the IP address and IP port 1.0.0.0 type:3389 (put a check Write port)
5. The ability to automatically peremerki lines in the scanned file, the function is very often needed brotherm that SP was not in a row ( put a checkmark next to Shuffle )
6. Turbo mode. Increases the speed of the scan 3-5 times, but the accuracy decreases. Turbo mode only use on a good channel, because will miss a lot of ports.
Requirements:
1. The presence of the WinPcap driver in the system.
2. The presence of Microsoft Visual C++ 2010 (x86) to download.
3. 100Mbit\1Gbit\10Gbit FullDuplex network connection (speed doesn't matter, because the throughput of packets is regulated by the ISP).
4. Windows 7 and above.
Bruton Dedik
Run ForcerX go to the Detector tab, specify the file with our Found'AMI.
Select the port that sanili, and click start. When will Yip at Recognized IP's you can begin to Brutus.
Go to the tab ForcerX specified txt with passwords, and specify seem txt with a Recognized IP's (daddy log file Detector Good) and put vratitsa, all Brutus went.
http://toolshacke.blogspot.com.by/p/blog-page.html
Run xDedic scanner, input ports (3389 - public Dedic; 3390, 3391 - Privat Dedic)
Insert a band of any kind and wait until Found's.
When I found about 2K found's can safely go in ForcerX.
Skank IP for Brutus
Features:
1. The scan ranges in CIDR format and in standard ie understands both the 1.0.0.0/24 and 1.0.0.0-2.0.0.0
2. Automatic loading ranges of the countries
3. The ability to scan multiple ports or range of ports
4. The ability to write to the file as just the IP address and IP port 1.0.0.0 type:3389 (put a check Write port)
5. The ability to automatically peremerki lines in the scanned file, the function is very often needed brotherm that SP was not in a row ( put a checkmark next to Shuffle )
6. Turbo mode. Increases the speed of the scan 3-5 times, but the accuracy decreases. Turbo mode only use on a good channel, because will miss a lot of ports.
Requirements:
1. The presence of the WinPcap driver in the system.
2. The presence of Microsoft Visual C++ 2010 (x86) to download.
3. 100Mbit\1Gbit\10Gbit FullDuplex network connection (speed doesn't matter, because the throughput of packets is regulated by the ISP).
4. Windows 7 and above.
Bruton Dedik
Run ForcerX go to the Detector tab, specify the file with our Found'AMI.
Select the port that sanili, and click start. When will Yip at Recognized IP's you can begin to Brutus.
Go to the tab ForcerX specified txt with passwords, and specify seem txt with a Recognized IP's (daddy log file Detector Good) and put vratitsa, all Brutus went.
http://toolshacke.blogspot.com.by/p/blog-page.html
